Accessories

1. AA-100: Protective Carrying Case

Protective carrying case designed to transport and store Apogee meters, sensors, and accessories. More Details








2. AL-100: Solar Sensor Leveling Plate

Proper sensor installation requires that the sensor be as level as possible for most applications. This leveling plate is designed for use on flat surfaces and to mount to surfaces, such as wood, with all solar radiation sensors made by Apogee Instruments, except our field spectroradiometers. The plate includes an integrated bubble level designed to work between -29 and 55 C. Please note this leveling plate is not compatible with the AL-120 mounting system. More Details





3. AL-120 Solar Mounting Bracket with Leveling Plate

The AL-120 Solar Mounting Bracket with leveling plate is designed to mount Apogee Instruments' solar sensor SP, SL, SQ, and SU series models to a mast or pipe with an outer diameter of 1.3" - 2.1". The bracket has a leveling plate with an integrated bubble-level to make leveling simple and accurate for proper sensor installation. More Details






4. AL-130 Albedometer Mounting Bracket

The AL-130 Albedometer Bracket is designed to accommodate the SP-510 upward-looking thermopile pyranometer and SP-610 downward-looking thermopile pyranometer to create an albedometer. It can also be used to mount other upward and downward facing sensors, such as our pyrgeometers. The AL-130 bracket is designed to be mounted to a mast or pipe with a 1.3" - 2.1" outer diameter and has an integrated bubble level to make leveling simple and accurate for proper sensor installation. More Details




5. AM-310: Sensor Wand

This accessory incorporates a mounting fixture at the end of a telescopic wand extendable to 33 inches (84 cm). All radiation sensors are compatible with the wand, which allows the user to place the sensor in hard to reach areas such as in a greenhouse. This wand is not is not suited for wet environments. For freshwater and saltwater use, we recommend our other wand, the AM-320. More Details





6. AM-320 Water Submersible Sensor Wand

This accessory incorporates a mounting fixture at the end of a 40 inch (102 cm) segmented fiberglass wand and is well-suited for fresh and saltwater use. The wand unscrews into three sections for easier storage and transport. All radiation sensors are compatible with the wand, which allows the user to place the sensor in hard to reach areas such as in aquarium tanks and greenhouses. More Details





7. AM-500: Net Radiometer Mounting Bracket

The AM-500 mounting bracket accommodates Apogee's net radiometer, and was designed to fit the mounting rod that comes with the net radiometer. The mounting bracket can be mounted to a mast or pipe. More Details







8. AP-001: Field Spec Reflectance Package

The AP-001 Field Spec Reflectance Package was made to include everything needed to make reflectance measurements. More Details








9. AS-010: 150° FOV/Reflectance Head

The AS-010 150° FOV / Reflectance Head is an accessory for Apogee Field Spectroradiometers model SS-110 and SS-120. The head gives a wide field of view for measurement of reflected radiation. More Details








10. AS-011: 25° FOV / Reflectance Head

The AS-011 25° FOV / Reflectance Head is an accessory for Apogee Field Spectroradiometers model SS-110 and SS-120. The head gives a narrow field of view for measurement of reflected radiation. More Details








11. AS-012: Field Spec Upward Solar Shield

The AS-012 Field Spec Upward Solar Shield is used with the Apogee Field Spectroradiometer model SS-110 and SS-120, and is designed to protect it from solar radiation when mounted upward. The AS-012 attaches to the AL-200 leveling plate included in SS-110 and SS-120 purchase. More Details






12. AS-014: Field Spec Angle-mounted Solar Shield

The AS-014 Field Spec Angle-mounted Solar Shield is used to protect the Apogee Field Spectroradiometer model SS-110 and SS-120 from solar radiation when mounted at an angle. More Details







13. AM-400 Two Band Radiometer Downward-Looking Mounting Bracket

For More Details








14. AS-003: Reflectance Probe for Lab Spectroradiometer

The reflectance probe is used with a spectroradiometer to measure reflected and transmitted spectra. The AS-004 is recommended to use with the AS-003 as a white reference standard. More Details







15. AS-013: Angled Field Spec Mounting Bracket

The AS-013 Angled Field Spec Mounting Bracket facilitates angled mounting of Apogee Field Spectroradiometers model SS-110 and SS-120 to a mast or a pipe. More Details







16. AS-004: Reflectance Standard for Lab Spectroradiometer

Use the AS-004 to get a white reference standard for measuring reflected and transmitted spectra. The reflectance standard is 50 mm in diameter and made of Halon. The white standard reflects 97% of the light from 300 to 1700 nm. More Details







17. AM-220: Angle Infrared Radiometer/Leaf and Bud Temperature Sensor Mounting Bracket

The AM-220 Angle Mounting Bracket is designed to mount an Apogee Instruments infrared radiometer (SI and SIF series) or radiation frost detector (SF series) to a mast or pipe with an outer diameter of 1.3" - 2.1". The bracket is designed to orient the infrared radiometer at varying angles to satisfy all applications. More Details







18. AL-050 Magnetic Angle Locator

The Magnetic Angle Locator helps read the angle of view when installing our infrared radiometers. It is built for durability and ease of use, with a high-impact, plastic body in high-visibility yellow and a clear, acrylic lens with easy-to-read increments in 0 to 90 degrees in 4 quadrants. Its V-grooved edge accommodates pipe and conduit, and features an extra-strong, permanent ceramic magnet for attachment to ferrous surfaces. The angle locator includes convenient metric rule on one edge and English rule on the other. More Details




19. AO-001: Oxygen Sensor / Meter Diffusion Head

The diffusion head is designed for soil applications with an oxygen sensor. The head keeps soil and debris clear of the sensor opening to ensure accurate measurements. More Details







20. AO-002: Oxygen Meter / Sensor Flow Through Head

The flow through head is designed for laboratory applications with an oxygen sensor. The head comes with 1/4 inch barbed nylon fittings for connecting to a hose, through which the air to be measured passes. More Details







21. AL-210 :Meter Leveling Plate / Mounting Bracket

Accurate readings require that the sensor be mounted level. The AL-210 leveling plate is designed to hold meters with integral sensors (Models MQ-100, MP-100, MU-100) in a stable and level orientation to maximize the accuracy of your meter. More Details






22. AM-001: Meter Mounting Bracket

The AM-001 Meter Mounting Bracket is designed for handheld meters with solar radiation sensors attached via cable (MQ-200, MQ-500, MU-200, MP-200). The bracket mounts the sensor to the back of the meter at horizontal plane making it easier to take spot-check measurements with the sensor and meter. More Details






23. AC-100: Communication Cable

The AC-100 cable is required to download data recorded in Apogee handheld meters to a computer. The cable houses electronics to convert the signal from the meter into a USB signal that a computer recognizes. The ApogeeAMS software (Windows compatible, XP and later; Mac compatible, 10.10 and later) used to interface Apogee meters with a computer is included on a flash drive. More Details





24. AB-100: Meter Battery

This is a CR2320 coin cell battery and is a replacement for the battery used in all of our hand-held meters. More Details








25. AT-001-SS Replacement Fan for Aspirated Shield

Replacement fan for TS-100/110 aspirated radiation shield. Comes with IP68 marine-grade stainless-steel cable connector (new for 2018) near the fan to make disconnection from weather stations easier. Also comes with replacement nylon anchoring screws. More Details






26. AC-421 SDI-12 to USB Converter

The AC-421 enables easy programming of any SDI-12 sensor by simply connecting the sensor to a computer’s USB port. Configuration of the sensor can be done using any terminal program or Apogee Instruments DSI software. More Details